🟦 PT-P910BT
⏳ untested · 🔌 USB · 📶 Bluetooth SPP
✋ Help verify this printer
Got a PT-P910BT? A two-minute test report turns this from ⏳ untested into ✅ verified for everyone who buys the same model.
At a glance
| 🟦 Family | Brother QL |
| 🩺 Status | ⏳ untested |
| 🔌 Transports | 🔌 USB · 📶 Bluetooth SPP |
| 🏷️ Media | TZe laminated tape (and HSe heat-shrink tube on PT-E models) |
| 📐 Print head | 560 dots @ 360 dpi |
| 📡 Protocol | pt-raster |
| 📦 Package | @thermal-label/brother-ql-core@0.6.0 |
| 📅 Last verified | — |
Engines
| Role | Resolution | Head | Protocol | Media | Capabilities | Status |
|---|---|---|---|---|---|---|
| primary | 360 dpi | 560 dots | pt-raster | tze | auto-cut, auto-detects loaded media, highResDpi | — |
Connectivity
| Transport | Details | Status |
|---|---|---|
| 🔌 USB | VID 0x04f9, PID 0x20c7 | — |
| 📶 Bluetooth SPP | name prefix PT-P910 | — |
Hardware quirks
Read before integrating
Bluetooth assumed classic SPP per nbuchwitz/ptouch — phase 4 hardware verification should confirm classic vs BLE GATT before users rely on it. HSe heat-shrink unsupported (TZe-only); engine.mediaCompatibility excludes hse-2to1 and hse-3to1 so the lookup never returns those entries.
Supported media
| Category | Name | Dimensions | SKUs |
|---|---|---|---|
| tape | 3.5mm TZe / TZ laminated tape | 3.5 mm | — |
| tape | 6mm TZe / TZ laminated tape | 6 mm | — |
| tape | 9mm TZe / TZ laminated tape | 9 mm | — |
| tape | 12mm TZe / TZ laminated tape | 12 mm | — |
| tape | 18mm TZe / TZ laminated tape | 18 mm | — |
| tape | 24mm TZe / TZ laminated tape | 24 mm | — |
| tape | 36mm TZe / TZ laminated tape | 36 mm | — |
Verification reports
Be the first — see the Help verify this printer card at the top of the page.
Have one of these? Verify it in the browser →
Found a bug? →
Spotted an error on this page? Edit the device data →